E-Type
H-Type
MG-Type
| Specifications | ||
| Heat Tolerance | ||
| Continuous Use |
200°C
|
392°F
|
| Maximum Temperature |
250°C
|
482°F
|
| Electric Properties | ||
| Capacity Tolerance |
±10%
|
|
| Insulation Resistance |
1000MΩ or DC500V
|
|
| Maximum Voltage |
1500V not exceeding 1 minute
|
|
| Dimensions | ||
| Maximum | 400mm X 3000mm | 15.75” X 118.11” |
| Minimum |
25mm X 50mm
|
.98" X 1.97"
|
| Thickness |
1.5mm
|
|
Inner Surface Adhesion
Clockwise from top left:
Varied Shapes, Fixed-temperature,
R-process, Grommet and Spring
Patent #1402857
Varied Shapes, Fixed-temperature,
R-process, Grommet and Spring
Patent #1402857
With our standard type, power densities between 0.6 and 0.8W/cm² (3.87-5.16W/in²) are suitable for most circumstances. However, as this may vary depending on installation conditions or methods of thermal control, please contact us with questions.
| Temperature Controller | |||
| OT-1 |
0-200°C
|
32-392°F
|
JPt100Ω Sensor
|
| OT-3 |
0-300°C
|
32-572°F
|
PID Controller
|
| OT-4 & OT-5 |
0-100%
|
Voltage
|
|
| EGO |
0-40°C, 30-110°C, 60-200°C
|
||
| Fixed-Temperature |
50°C, 70°C, 100°C, 120°C, 150°C
122°F, 158°F, 212°F, 248°F, 302°F |
||